How to use PhotoSync with a Seagate Wireless Plus (mid 2014)?

This instruction applies for all Seagate Wireless Plus drives that were produced since mid 2014. The Firmware versions of these devices start with 4.0.0.071

To use PhotoSync with a Seagate Wireless Plus drive, connect your iOS device to the Wi-Fi network of the Seagate Wireless Plus.

To connect to your Seagate Wireless Plus with PhotoSync using WebDAV, open the PhotoSync settings, choose Configure > WebDAV and create a WebDAV connection with the following configuration values:

Server 172.25.0.1
Port 80
Login leave empty
Password leave empty
Directory /Webdav-01
Use SSL Off

You must use /Webdav-01 as directory to be able to access the file system of the drive.

Tap on Done to initiate the connection. Use the WebDAV target you created to transfer photos to your Seagate Wireless Plus or to browse and retrieve photos from your Seagate Wireless Plus.

Seagate Wireless Plus connection settings
Seagate Wireless Plus connection settings

593 out of 1055 found this article helpful
Was this article helpful? Yes | No

Go back

Need more support?