Android

Support
Android
How to transfer from an USB OTG device?

How to transfer from an USB OTG device?

How to transfer from an USB OTG device?


Start PhotoSync on your device and plug your USB OTG adapter to your device. PhotoSync should get a notification that an USB device was connected. Tap OK to allow PhotoSync to access the USB device and to read the file system of the device.

Figure 1. OTG USB device notification
OTG USB device notification

 

Every folder of the device that contains photos or videos will be shown as an album in the External Storage section in the PhotoSync sidebar. Please note that apps have to come with support for the file system of the USB device. For this reason PhotoSync can only support USB devices that are formatted with the FAT32 file system. ExFAT, NTFS, HFS or EXT3 file systems are not supported by PhotoSync. If PhotoSync can't read the USB device file system or if there are no images or videos in the folders, no external storage albums will be shown in the PhotoSync sidebar.

Figure 2. External Storage albums
External Storage albums

 

Select the USB device album of your choice from the sidebar and select the photos that you want to transfer to one of the supported PhotoSync targets by tapping the photo thumbnails.

Figure 3. Photo selection in USB device folder 105_PANA
Photo selection in USB device folder 105_PANA

 

Start the transfer by tapping the red transfer button in PhotoSync and select whether you want to transfer New, Selected or All photos of the current album.

Figure 4. Choose which photos you want to transfer
Choose which photos you want to transfer

 

Select the target to which you want to transfer your photos.

Figure 5. Target selection
Target selection

 

If the target is a computer with PhotoSync companion, please select the target computer.

Figure 6. Select target computer
Select target computer

 

Watch your transfers to go to the selected target.

Figure 7. Transfer progress
Transfer progress

 

Go back